Multifunctional agricultural tractor
ANT 4135F
A multifunctional tractor is designed to perform a wide range of agricultural works with mounted, semi-mounted and trailed agricultural devices and equipment. It may be used both for special and transportation works.
ADVANTAGES
Due to high value of torque backup engines can work at low revolutions with heavy load without frequent gear shifts.
Power-assisted distribution box and extended axle allow heavy loading.
Available PTO shaft provides the usage of a tractor as power station to drive various stationary agricultural and industrial machines.
Power-assisted distribution box and extended axle allow heavy loading.
Available PTO shaft provides the usage of a tractor as power station to drive various stationary agricultural and industrial machines.
CAPACITY
Due to a powerful engine and higher weight of the tractor, a maximum productivity is achieved in all conditions.
ENDURANCE
The tractor is built as a reliable machine, even at the maximum performance.
ECONOMICAL EFFICIENCY
Low fuel consumption and reasonably priced spare parts make ANT tractor one of the most popular machines in the market.
TECHNICAL CHARACTERISTICS
Maximum power | 100.2 kW |
Maximum torque | 581 Nm |
Tank capacity | 200 l |
Number of gear steps | 24/18 (forward/reverse) |
Three-point attachment category | 2 and 3 N |
Maximum lifting capacity | 77 kN |
Pumping capacity | 69 l/min |
Number of external hydraulic outlets | 6+1 drainage |
Maximum front counterweight | 700 kg |
Gearbox | mechanical, four-stage, with three speed torque increase, synchromesh. |
ENGINE ZETOR 1605
Engine capacity | 4.2 l |
Number of cylinders | 4 |
Number of valves | 16 |
Turbo-supercharge | ● |
Charge air cooler Intercooler | ● |
Fuel injection system | Mechanical |
Preheater | ● |
Specific fuel consumption | 240 g/kWh |
Engine power rating | 100.2 kWt |
Standard of power measurement | 2000/25/EC |
Maximum torque | 581 Nm |
TRANSMISSION
Classical four-stage, fully synchronized tractor gearbox, equipped with two additional speed ranges and three speed torque accelerator (24/18), differs in the necessary size of gear wheels and bearings with long lifetime. There are 10 gear steps that are rationally arranged within the limits of 4-12 km/h
Drive type | 4WD, front axle on demand |
Gear box type | Mechanical, synchronized with torque accelerator |
Clutch type | Dry |
Clutch drive | Hydraulic |
Number of speeds, forward/reverse | 24/18 |
4 WD control ON/OFF | Electrohydraulic |
Number of gears in the range of operation speed | 10 |
Movement speed, max/min | 37,9/2,1 |
Reverse control type | Mechanical |
Trailer brake | Hydraulic, pneumatic (optional) |
Lock of front/rear axle differential | Self-locking/electronic |
Front fenders | ● |
Rear tyres type | Radial |
Front axle brake | By connecting front axle, multidisc clutch |
Hub type of rear half-axle | Flange |
Front tyres dimension | 420/70 R24 |
Rear tyres dimension | 520/70 R38 |
Rear PTO shaft | 540/1000 + non-fixed |
Rear PTO shaft maximum power | 82 kWt |
Rear PTO shaft coupling type | Wet clutch |
Front PTO shaft at 1000 rpm | ● (optional) |
Front PTO shaft maximum power | 45 kWt |
PTO shaft control ON/OFF | Electronic |
CABIN
Convenience, comfort and ergonomics are basic characteristics of cabins of ANT 4135F tractors. All features are designed with better orientation to operating personnel, providing maximum running efficiency and comfort in any environment and terrain conditions.
Lock of front/rear axle differential | Self-locking / electronic |
Front fenders | • |
Rear tyres type | Radial |
Front axle brake | By connecting front axle, multidisc clutch |
Hub type of rear half-axle | Flange |
Front tyres dimension | 420/70 R24 |
DIMENSIONS
In ANT 4135F tractors attention is paid to simple, reasonable and rational implementation. In this way reliability, easy maintenance and prompt servicing are achieved.
Tractor mass without counterweight | 4500 kg |
Maximum allowable tractor mass | 8000 kg |
Maximum mass of front counterweight | 700 kg |
Maximum mass of rear counterweight | 350 kg |
Turning radius without wheel braking | 5,7 m |
Minimum track width of front wheels | 1590 mm |
Maximum track width of front wheels | 2040 mm |
Minimum track width of rear wheels | 1500 mm |
Maximum track width of rear wheels | 1800 mm |
Wheel base | 2490 mm |
Length | 4740 mm |
Width | 2310 mm |
Height | 2825 mm |
Minimum agro technical clearance | 508 mm |
HYDRAULIC SYSTEM
Available implementation of heavy equipment, maximum lifting capacity of hydraulics is up to 7700 kg.
High productivity is provided by automatic control of three point attachment by means of HighTronic system.
Long lifetime at irregular load on three point attachment.
High productivity is provided by automatic control of three point attachment by means of HighTronic system.
Long lifetime at irregular load on three point attachment.
Rear attachment category | II (IIIN) |
Maximum lifting capacity of rear attachment by levers | 77 kN |
Maximum lifting capacity of front attachment by levers | 35 kN |
Operation type of position control | Electronic EHR |
Rear drawbar with overhang adjustment | ● |
Flow rate of hydraulic system pump | 70 l/min |
Hydraulic system type | Closed center |
Base number of hydraulic outlets | 6+1 |
Maximum number of hydraulic outlets | 6+1 |
Distribution valve control | Mechanical |
ATTACHABLE EQUIPMENT
- Number of operating positions 4
- Operating width 2460/2473/2487 mm
- Number of hydraulic cylinders 2 pcs
- Cutting blades Y-shaped blades and beaters
- Maximum operating width 5920 mm
- Number of blades 36/44 (18/22)
ANY QUESTIONS?
JSC «KOVROV ELECTROMECHANICAL PLANT»
55 Krupskoy str., Kovrov, Vladimir region, Russia
© 2017 – 2024. All rights reserved
REQUEST A PRICE
We will contact you!