Main - ANT 4135F Multifunctional agricultural tractor

CONTACTS

REQUEST A PRICE

We will contact you!

MAIN DEALERS CONTACTS DOWNLOAD

Multifunctional agricultural tractor
ANT 4135F

A multifunctional tractor is designed to perform a wide range of agricultural works with mounted, semi-mounted and trailed agricultural devices and equipment. It may be used both for special and transportation works.

ADVANTAGES

Due to high value of torque backup engines can work at low revolutions with heavy load without frequent gear shifts.

Power-assisted distribution box and extended axle allow heavy loading.

Available PTO shaft provides the usage of a tractor as power station to drive various stationary agricultural and industrial machines.

CAPACITY

Due to a powerful engine and higher weight of the tractor, a maximum productivity is achieved in all conditions.

ENDURANCE

The tractor is built as a reliable machine, even at the maximum performance.

ECONOMICAL EFFICIENCY

Low fuel consumption and reasonably priced spare parts make ANT tractor one of the most popular machines in the market.

TECHNICAL CHARACTERISTICS

Maximum power	100.2 kW
Maximum torque	581 Nm
Tank capacity	200 l
Number of gear steps	24/18 (forward/reverse)
Three-point attachment category	2 and 3 N
Maximum lifting capacity	77 kN
Pumping capacity	69 l/min
Number of external hydraulic outlets	6+1 drainage
Maximum front counterweight	700 kg
Gearbox	mechanical, four-stage, with three speed torque increase, synchromesh.

ENGINE ZETOR 1605

Engine capacity	4.2 l
Number of cylinders	4
Number of valves	16
Turbo-supercharge	●
Charge air cooler Intercooler	●
Fuel injection system	Mechanical
Preheater	●
Specific fuel consumption	240 g/kWh
Engine power rating	100.2 kWt
Standard of power measurement	2000/25/EC
Maximum torque	581 Nm

The exclusive popularity of this engine type is based on low fuel consumption, reliable and simple configuration that result in the reduction of procurement and maintenance expenses and provide flawless operation.

TRANSMISSION

Classical four-stage, fully synchronized tractor gearbox, equipped with two additional speed ranges and three speed torque accelerator (24/18), differs in the necessary size of gear wheels and bearings with long lifetime. There are 10 gear steps that are rationally arranged within the limits of 4-12 km/h

Drive type	4WD, front axle on demand
Gear box type	Mechanical, synchronized with torque accelerator
Clutch type	Dry
Clutch drive	Hydraulic
Number of speeds, forward/reverse	24/18
4 WD control ON/OFF	Electrohydraulic
Number of gears in the range of operation speed	10
Movement speed, max/min	37,9/2,1
Reverse control type	Mechanical
Trailer brake	Hydraulic, pneumatic (optional)

Lock of front/rear axle differential	Self-locking/electronic
Front fenders	●
Rear tyres type	Radial
Front axle brake	By connecting front axle, multidisc clutch
Hub type of rear half-axle	Flange
Front tyres dimension	420/70 R24
Rear tyres dimension	520/70 R38
Rear PTO shaft	540/1000 + non-fixed
Rear PTO shaft maximum power	82 kWt
Rear PTO shaft coupling type	Wet clutch
Front PTO shaft at 1000 rpm	● (optional)
Front PTO shaft maximum power	45 kWt
PTO shaft control ON/OFF	Electronic

CABIN

Convenience, comfort and ergonomics are basic characteristics of cabins of ANT 4135F tractors. All features are designed with better orientation to operating personnel, providing maximum running efficiency and comfort in any environment and terrain conditions.

Lock of front/rear axle differential	Self-locking / electronic
Front fenders	•
Rear tyres type	Radial
Front axle brake	By connecting front axle, multidisc clutch
Hub type of rear half-axle	Flange
Front tyres dimension	420/70 R24

DIMENSIONS

In ANT 4135F tractors attention is paid to simple, reasonable and rational implementation. In this way reliability, easy maintenance and prompt servicing are achieved.

Tractor mass without counterweight	4500 kg
Maximum allowable tractor mass	8000 kg
Maximum mass of front counterweight	700 kg
Maximum mass of rear counterweight	350 kg
Turning radius without wheel braking	5,7 m
Minimum track width of front wheels	1590 mm
Maximum track width of front wheels	2040 mm
Minimum track width of rear wheels	1500 mm
Maximum track width of rear wheels	1800 mm
Wheel base	2490 mm
Length	4740 mm
Width	2310 mm
Height	2825 mm
Minimum agro technical clearance	508 mm

HYDRAULIC SYSTEM

Available implementation of heavy equipment, maximum lifting capacity of hydraulics is up to 7700 kg.

High productivity is provided by automatic control of three point attachment by means of HighTronic system.

Long lifetime at irregular load on three point attachment.

Rear attachment category	II (IIIN)
Maximum lifting capacity of rear attachment by levers	77 kN
Maximum lifting capacity of front attachment by levers	35 kN
Operation type of position control	Electronic EHR
Rear drawbar with overhang adjustment	●
Flow rate of hydraulic system pump	70 l/min
Hydraulic system type	Closed center
Base number of hydraulic outlets	6+1
Maximum number of hydraulic outlets	6+1
Distribution valve control	Mechanical